Assured Testing Services | Proppant Sand Testing Capabilities

Standards are API RP-19D and its ISO 13503-5 equivalent. The test is performed by sandwiching 2.0 lbs / sq ft of proppant between carefully-fitted sandstone cores or steel plates in a standard API test cell.

Setting The Standard For Resin Coated Proppant Testing ...

Abstract. This paper describes the performance evaluation of curable resin coated proppants currently used in Russian Oilfields. The performance of these RCPs is compared based on established API/ISO standards and standard resin coated proppant testing methods currently applied within Schlumberger.

INTERNATIONAL STANDARD 13503-2 - EVS

International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

Standards – ChangQing Proppant - cqprop.com

GB/T 19001-2008/ISO 9001:2008 Standard. The certificate is valid for the following scope: PRODUCTION AND SERVICE OF OIL FRACTURING PROPPANT (CERAMIC SAND) Issue Date: August 13 th,2015 Expiry Date: August 12 th,2018. Within the certificate validity, the organization must pass the annual surveillance audit and get the mark before the prescribed ...

API RP 19C - Measurement of Properties of Proppants Used ...

May 01, 2008· This part of ISO 13503 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations. NOTE "Proppants" mentioned henceforth in this part of ISO 13503 refer to sand, ceramic media, resin-coated proppants, gravel-packing media and other materials used for hydraulic fracturing and gravel ...

PropTester

To better understand and address issues that can impact well production, PropTester's laboratory evaluates hydraulic-fracturing and/or gravel-packing proppants with the industry Standard Conductivity Procedures (ISO 13503-5 / API RP-19D) as well as Well-Specific Testing Parameters.

ISO 13503-2:2006 - Techstreet

ISO 13503-2:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations. "Proppants" mentioned henceforth in ISO 13503-2:2006 refer to sand, ceramic media, resin-coated proppants, gravel-packing media and other materials used for hydraulic fracturing and gravel-packing operations.

API RP 19C provides standard testing procedures for ...

EN ISO 13503-2/PRA1-2008 petroleum and natural gas, iso 13503 2 produits standard,EN ISO 13503-2/PRA1-2008, petroleum and natural gas industries, Standard Number: EN ISO 13503-2/PRA1-2008 Title: petroleum and natural gas industries .ISO Standards for use in the oil & gas industry - IOGPISO Standards for use in the oil & gas industry Standards in purple issued in 2016 Standards in blue are …

DS/EN ISO 13503-2 - standards.globalspec.com

Dec 01, 2009· scope: This International Standard Addendum provides specifications for proppants used in hydraulic fracturing and gravel packing operations. NOTE "Proppants" mentioned henceforth in this International Standard refers to sand, ceramic media, resin-coated proppants, gravel packing media, and other materials used for this hydraulic fracturing and gravel packing operations.

Testing Standards | Hydraulic Fracturing Proppants

Dec 12, 2018· This standard provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations. The objective of this standard is to provide a consistent methodology for testing performed on hydraulic fracturing and/or gravel-packing proppants.

Petroleum and natural gas industries – Completion fluids ...

NOTE "Proppants" mentioned henceforth in this part of ISO 13503 refer to sand, ceramic media, resin-coated proppants, gravel-packing media and other materials used for hydraulic fracturing and gravel-packing operations. The objective of this part of ISO 13503 is to provide a consistent methodology for testing performed on

A comprehensive review on proppant technologies

tify proppant performance, specific quality-control procedures outlined by American Petroleum Institute (API) and the Inter-national Standards Organization (ISO) must be followed. These standard procedures must be continuously improved owing to the inconsistency between lab results and what was observed in the field.

iso standard for proppants - hospetsteels.in

ISO 13503-2 Proppant Crush Test for Hydraulic Fracturing and ... API RP-56, API RP-60, and API RP-61 testing standards were used to determine properties of proppants used in hydrofracking.

Introducing New API/ISO Procedures for Proppant Testing ...

The committee was charged with re-writing the API RP 56, 58, and 60 relating to sand as a proppant, gravel packing, and high strength proppants, respectively. This new document, ISO 13503-2 "Measurement of Properties of Proppants Used in Hydraulic Fracturing and Gravel-Packing Operations?? is considered a standard.

Overview of Proppants and Existing Standards and Practices

Overview of Proppants and . Existing Standards and Practices. John Getty, Instructor and Lab Director . Petroleum Engineering, Montana Tech ©2013 John Getty, Montana Tech ... ISO 13503-2 §8 • Weigh out a 5 gram sample of proppant • Soak the material in a 12:3 mixture of …

Proppants - an overview | ScienceDirect Topics

As documented in the API/ISO standard testing procedures, such as the ISO 13503-2 "Measurement of Properties of Proppants Used in Hydraulic Fracturing and Gravel-Packing Operations," the test cell holds proppants at 2.0 lb/ft 2, which provides the cross-section area and width of the proppant pack for establishing fluid flow. Proppant ...

Frac Sand Testing by OPF Enterprises - On the Plant Floor

Stabilizes proppant at near-wellbore for maintaining proppant during production; Minimizes embedment to increase fracture width; OPF's ability to apply resin coatings using a planetary style mixing unit with heated jacketed vessel promotes a consistent mix and standard temperature control with every batch. Types of Frac Sand Testing by OPF

STANDARD 40/70 MESH - wisconsinproppants.com

40/70-mesh standard frac sand is sourced from mines in the region of operations. It meets all API RP 19C standards for acid solubility in hydrochloric acid, the …

ISO Standards for use in the oil & gas industry - IOGP

ISO Standards for use in the oil & gas industry Standards in purple issued in 2016 Standards in blue are a priority for 2017 issue These ISO standards, TR and TS (abbreviated titles) are only a core collection of several hundreds of standards available for the oil & gas industry from ABNT, ANSI, API, AS, BSI, CSA, NORSOK, NF, GOST, SAC etc.

Importance of Size & Shape for Proppants Quality

The size and shape of frac sands and other proppants plays a critical role in keeping fractures open and at the desired conductivity. Learn how the CAMSIZER has greatly improved the accuracy and speed of frac sand and proppant analysis. This information will be useful for any petroleum engineer or proppant supplier referencing ISO 13503-2 or

Testing and Analysis — Wayfinder

API/ISO standard testing allows us to compare and ensure the same procedure is followed for a sound 'apples to apples' comparison of all proppants and sand that come through our facilities. We can ensure specification consistency through testing, including: size and shape, conductivity and permeability, crush resistance, and turbidity.

Proppants | Bettis Brothers Sand & Gravel

BBSG's products meet the strictest quality standards and are verified by the best testing labs in the US following ISO 13503-2:2006 and APIRP19C:2008 testing standards. Our sand proppants provide excellent factors for crush resistance, sphericity, roundness, acid solubility, and turbidity.

Products - SmartSand

Smart Sand Inc. is focused on the industrial sand needs of the energy industry. Our high-quality proppants, which are available in standard and custom blends, are essential to dependable flow rates and successful oil and gas recovery from unconventional wells.

API RP 19C : Measurement of Properties of Proppants Used ...

API RP 19C : Measurement of ... This part of ISO 13503 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations. NOTE "Proppants" mentioned henceforth in this part of ISO 13503 refer to sand, ceramic media, resin-coated proppants, gravel-packing media and other materials used ...

ISO 13503-5:2006 - Petroleum and natural gas industries ...

ISO 13503-5:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel packing operations. ISO 13503-5:2006 provides a consistent methodology for testing performed on hydraulic fracturing and/or gravel packing proppants.

Iso Fracturing Proppant, Iso Fracturing Proppant Suppliers ...

Alibaba.com offers 108 iso fracturing proppant products. About 6% of these are ceramics, 4% are other petrochemical related products, and 1% are refractory. A wide variety of iso fracturing proppant options are available to you, such as industrial ceramic, refractory.

100 Mesh - wisconsinproppants.com

100-mesh standard frac sand is sourced from mines in West Texas and in the region of operations It meets all API RP 19C standards for acid solubility in hydrochloric acid, the acid of choice in North American fracturing operations.. All sources for this proppant are carefully selected for quality with properties that ensure the proppant's ability to withstand typical downhole environments ...

API Std 19C - techstreet.com

This standard provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations. The objective of this standard is to provide a consistent methodology for testing performed on hydraulic fracturing and/or gravel-packing proppants.

ISO 13503-5:2006 - Petroleum and natural gas industries ...

ISO 13503-5:2006 Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants. ISO 13503-5:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel packing operations.

Proppant Selection In Unconventional Reservoirs

– Since 2004, global proppant utilization has increased 15-fold, and is currently estimated at 60-70 billion lbs per year – Demand has outstripped the pace of expansion in all Tiers • Ceramic Plants, Resin Coating Plants, Sand Mines – Driven proppant costs up • Proppant Quality Can Suffer When Demand is High – SPE 84304, 101821, 119242